DV-1151 Hand-hold Signal Level Meter


    Features
    Trunk-line AC voltage, V/A, C/N and TILT measurable
    Automatic over-voltage shut-off protection
    AC/DC optional (Ni-H/Li storage battery inside)
    Full-digital key-board operation, direct freq. & channel input
    Automatic scanning, Automatic channel-filtering, Automatic
    error-operation amending
    All standard channels and subjoin channels pre-set inside
    New channel-table setting according to user's
    special requirement
    Spectrum displaying
    English/Chinese operation interface
    Audio output (speaker set-in)

    LEVEL

    Frequency Range 46-870MHz
    Resolution Bandwidth 280KHz ± 50KHz
    Channels All Channels
    Level Range 30dB μ V to 120dB μ V
    Accuracy ± 1.5dBuV(under room temperature) ± 2.5dBuV(- l0 to +40 ℃ )
    input impedance  75 Ω (BNC or F connector)
    Wave detection Peak value

    AUTO SCAN TESTING

    Max Channel Scan 125 Channels
    Scan Range  All Channels within 46 to 870MHz
    Scan Speed 30 Channels/Min
    Memory Groups 24 Groups(00 to 23) Each group store Max 100 Channels.

    VOLTAGE

    Voltage Range 0 to 100VAC
    Accuracy ± 1.5V
    Resolution  0.lV

    C/N

    Level Range 80dBuV to l05dBuV

    OTHERS

    Dimension 214mm * 94mm * 47mm
    Weight 1.4 kg
    Working Temperature -l5 ℃ to + 40 ℃
    Display LCD l28*64 Matrix Super big LCD with back light

    POWER

    DC Supply DC 7.2V/1.2Ah rechargeable battery
    AC Supply AC 220V/50Hz ± 10%
    Battery working hours longer than 3.5 hours at continuous working mode
    Recharging hours12 to 14 hours.

    ACCESSORIES

    Battery Charger charger 1pc
    RF Input Port F type 2pcs
    Fuse 2.5A(or 2A) 2pcs
    User Manual l copy
Signal Level Meter